Tikka T3X Accessories: Vertical Grip, Cheek Riser, & Bag Rider
Couldn't load pickup availability
Product Details
Tikka T3X Accessory Kit: Vertical Grip, Cheek Riser, & Bag Rider
Upgrade your factory Tikka T3X stock with our meticulously designed Tikka Accessory Kit. Designed to give you the ergonomics of an aftermarket stock for a fraction of the price. Whether you're out hunting or competing in NRL Hunter matches, this kit delivers superior comfort, control, and performance over the standard stock.
Product Components:
1. Cheek Riser - Available in three heights to suit all ring heights and shooter face sizes:
- Low: +0.5" above factory comb
- Medium: +0.75" above factory comb
- High: +1.0" above factory comb
Note: Medium and high versions feature a negative comb to reduce felt recoil, minimize muzzle rise, and improve follow-up shot speed
2. Vertical Grip - Positions the grip 1.75" from the trigger with an ergonomic palm swell for better control of your 90° trigger press
3. Bag Rider - Provides a flat, stable rear surface for consistent prone positioning and secure rear bag support
We have thoughtfully and meticulously designed these components to provide you with increased ergonomics and shootability without breaking the bank. Easy to install, built to last and transform your Tikka into a more accurate and comfortable precision rifle.
Notes and Compatibility:
- Compatible with the following Tikka T3X models: T3X, Lite Veil, Roughtech, Varmint, CTR, Superlite, Lite
- Compatible with Tikka T1X
- Cheek Riser and Bag Rider compatible with Tikka T3
- Bag Rider allows you to use sling stud
- When selecting a “bundle” you are getting all three components at a discounted price. The bundle includes the Vertical Grip, Bag Rider and Cheek Riser. We offer three different bundle options, each with the designated Cheek Piece height.
- Ships only to customers in the US.
- Canadian customers - you can buy our Tikka accessories at Mindful Munitions
I love the product it’s fits well on my tikka and it’s very easy to install. But really my review is on the customer service, I ordered the riser and bag rider at the same time. I did not need the bag rider i had realized, so i emailed the company and within 1 hour i had a reply, a refund, and the order was updated. That speaks volumes in it self about the company. Absolute 10/10 i would buy again!
I love the product ! It’s very ergonomic and gives my tikka and precision feel/look to it. It’s not only that you shoot good but look good as well. Also I love the customer service, the first package was missing the screws and I let them know. Sure enough they answered me right away and a few days later not only did they send me the new screws, they sent me an entire new package with no charge!! Only downside is that I’m going to have to buy another tikka to put this new package on lol.
The vert grip is fine the way it is. Love it. The bag rider is another situation for me. The way its made it changed the LOP that is not comfy for me so i drilled .040 pilot holes that followed the “bag rider” ID along the horizontal axis and then cut the vertical part off with my dremel and smoothed the radius to match the bottom of the stock and reattached the rider to the stock with the included screw in the factory sling stud hole. BOOM,done, perfect!
It is solid enough with that one screw but if it comes loose ill epoxy or use silicone to attach it to the stock BUT i love the bag rider itself. It works fantastic
I’ve been wanting a medium cheek riser for some time. I saw this one and fell in love with how it looks. Risked it all 😜 and ordered it for my childhood rifle (only one I got), my updated 1989 Remington Model 700 30-06 (not a Tikka). Wow! Didn’t even double tape it; screwed it down! Best looking, best quality and the feel.. game changer! Can’t wait to get a muley in my sights. FYI, I did heat it up a little 3 times with the wife’s hair dryer to widen it a bit and in total, install was under 5-10 minutes. Fit like a glove! Thanks for making this beautiful cheek riser. Even if my Remington wasn’t the target audience. ⭐️⭐️⭐️⭐️⭐️
Cheek riser,great product, fit perfectly. Its just very rough surface to put your face against when shooting high power magnum rounds. I sanded it smooth with sever levels of sand paper to make it more accommodating. I would recommend the product. As for the Bag Rider I haven't installed it yet, I need to utilize the sling strap for upcoming hunt. If it wernt for the rough surface I would give it 5*
I ordered the medium cheek riser for a Tika T3X, it fit my gun great I use the double-sided tape instead of the screw I think this is the best looking cheek riser out there and the fit and feel of it is great I did a review on the gun and included the cheek riser and gave it a very good report check out "hammerdown green" on YouTube.
I purchased a Full Frame Outdoors cheek rest for my Tikka T3X Lite and it is one of additions I have made. A great scope with a solid base and rings is a must, however if you don’t have a good cheek rest (anchor point) you cannot get full potential from your glass. This Full Frame Outdoors medium cheek rest gives me a solid rest for consistency.
And the communications with Full Frame Outdoors is second to none. Kieth was quick to respond and very helpful. Will be purchasing more products from Full Frame Outdoors.
First impression is that the texture has more a 3D print vibe than it looked in the photos. Not bad but just wasn’t expecting it. It does have a nice roughness to it that I like. Cheek riser is awesome and the perfect height. Waaay cheaper than the tikka version. The grip took a second to get used to but after a bit it began to feel natural. The swollen palm is a really nice touch and makes the grip feel sturdy. IDE recommend for the price!
really happy with these upgrades. the vertical grip feels great, especially the palm swell, and the texture is solid.
for the cheek riser, i used double-sided tape instead of drilling, which works well since it fits tightly already. i added some hockey tape on top to cover the hole and improve comfort on the cheek.
overall, great accessories and a nice, clean upgrade.
Product was good fit and easy installation. Product was sent prompty. I had an issue with my order (I ordered the wrong size) and Keaton was quick to respond and resolved quickly. Well done -thank you!
Cheek piece exactly on spot ! Easy to install. Tight perfect fit on a Veil Wideland Tikka.
Couldn't be happier with my cheek riser. I bought a medium height cheek riser for my Tikka T3X CTR in .308. It was super easy to install, no need for drilling a new hole or anything, had it on in 30 seconds. I now feel like my Tikka is exactly where I need it for deer season and I did it without spending $300+ on a chassis that weighs a ton.
Shipping was extremely fast and their customer service was super helpful..
I will be back for more.
Made the factory Tikka stock usable.
Vertical grip is comfortable, and feels good in my palm
Really like the vertical grip
Excellent customer service. Very accommodating after I ordered the wrong part. A handwritten thank you inside the package. These folks care about their product, their business, and their customers.
Perfect fit. Haven't fired guns yet but feel is good of the vertical grip.
Just ordered the vertical grip. I really like the texture and the improved angle over the Tikka Vertical grip. It is swelled slightly and fits my hand nicely. Just shot NRL22 stage last weekend and it performed well. The handwritten thank you note means a lot to me as a business owner and consumer. Will definitely buy again if I need another.
Good product easy to install
Haven’t installed yet but customer service was excellent!
Perfect fit and easy installation.
Perfect fit
Great product and outstanding customer service!!
Excellent customer service. Quality products at a great price and a handwritten thank you that came in the box. Looking forward to ordering again.
Great company and product
Love the improved ergonomics, love the price…just make sure you are okay with the added length of pull if you install the bag rider
